Purpose:

    This instrument is suitable to the standards of GB/T269, GB/T4509 and T0604. Test the plasticity of lubricating grease and the hardness of bitumen.

  Technical Parameters:

 Time Setting: 5,8,10,12,30 and 60S

 Accuracy: 5±0.1S

 Measurement Range: 620 Pen Unit

 Needle: 2.5±0.05g

 Full Scale Cone: 102.5±0.05g

  Purpose:

    This instrument is suitable to the standards of GB/T269, GB/T4509 and T0604. Test the plasticity of lubricating grease and the hardness of bitumen.

  Technical Parameters:

 Time Setting: 5,8,10,12,30 and 60S

 Accuracy: 5±0.1S

 Measurement Range: 620 Pen Unit

 Bitumen Needle: 2.5±0.05g

 Full Scale Cone: 102.5±0.05g

  Purpose:

    This instrument is suitable to the standards of GB/T269, GB/T4509 and T0604. Test the plasticity of lubricating grease and the hardness of bitumen.

  Technical Parameters:

 Time Setting: 5,8,10,12,30 and 60S

 Accuracy: 5±0.1S

 Measurement Range: 620 Pen Unit

 Bitumen Needle: 2.5±0.05g

 Full Scale Cone: 102.5±0.05g

  Purpose:

    Made as per GB/T 4509, T0604-2000 bitumen penetration test method, suitable to determine the depth of standard needle directly down in test sample in the condition of regulated temperature and time period, and the needle is regulated weight and appearance, 0.1 mm is equal to 1 penetration.

Referrence standard: ASTM D5

 Specification:

To test both needle/cone penetration

Controlled by computer, auto test needle/cone penetration

LVDT is calibrated by computer, nicety and credible

 Magnetic stirring, auto control temperature, and accuracy is high

 With LCD to display all kinds of parameters, with microprinter to print test report

With communication port, to communicate with computer

Store 30 test data

  Technical Parameters:

Measurement range: 0～500 penetration     read resolution: 0.1penetrometer

Time control: 0～99 s, random preset       error is less than ±0.1 s

Temperature control range: 5～100 ℃（matched with low temperature water bath）

Temperature control accuracy: ±0.1 ℃

  Purpose:

    This instrument is suitable to the standards of GB/T6536 .Test the distilling property of car-used gas, air gas, jet fuel, solvent with special boiling point, coal oil diesel oil, cut fuel and similar petroleum products.

Referrence standard: ASTMD86

  Technical Parameters:

 Electric Stove Heating Power: 1000W

 Adjusting temperature continuously with controllable silicon.

 Cooling Tube: Φ14mm

 Cooling Slot Volume: 6l

  Purpose:

    The instrument is designed and made according to regulations of the People’s Republic of China standard GB/T 6536 <petroleum products—determination of distillation>, and it is suitable to determinate the distillation of gasoline, aviation gasoline, jet fuel, solvent with special boiling point, naphtha, diesel oil, distillate fuel and resemble petroleum products.

Referrence standard: ISO3405、ASTMD86 and IP123

  Technical Parameters:                     

 Power supply: 220V±10% 50Hz AC

  Power of electrical stove heating: 1000W

  Cylinder dimension: 100ml, degree: 1ml

  Distillation flask: 125ml, and suitable to the regulations of GB/T6536

  Thermometer: full immersed stick, measuring range: -2~+300℃ and -2～+400℃,   degree: 1℃

  Stove active plate: made of SiC (carborundum), and the hole diameter: Φ32、Φ38、Φ50

  Temperature controller:

      Controlling temperature range: 0~60℃, random set

      Controlling temperature precision: ±0.5℃

  Temperature display method: LED digital display

  Surrounding temperature: ≤+35℃

  Relative humidity: ≤85%

  Refrigeration system: new type refrigeration compressor

  Whole set power: not more than 5000W

  Purpose:

    This instrument is designed and product with GB/T6536 "Test Method of Petroleum  Destination".

Referrence standard:  ISO3405、ASTM D86 IP123

  Technical Parameters:                     

 Temperature range of cold bath: 0-60℃

  Temperature control accuracy: ±0.5℃

  Power: 1300W

  Refrigerating plant: compressor refrigeration

  Purpose:

    This instrument is suitable to the standard of GB/T255. Test the cuts composition of motor fuel, solvent oil and light degree petroleum products.

  Technical Parameters:

 Electric Stove Heating Power: 1000W

 Power source: 220V 50Hz AC

 Adjusting temperature continuously with controllable silicon.

  Purpose:

    This instrument is suitable to the standard of GB/T1884. Test the density of petroleum and liquid petroleum products.

  Technical Parameters:

 Heating power: 700W, 1000W

 Bath Volume: Φ300×380mm

 Measuring Cylinder: 500ml

 Petroleum Products Density Tester: SY-05(Group of 10)

 Temperature Control Range: -20℃～100℃

 Temperature Control Accuracy：±0.25℃

 Temperature Sensor: Pt100

 Power source: 220V 50Hz AC