Purpose:

  This instrument is suitable to the standard of GB/T14684-2001.

  Technical Parameters:

 Rotating Speed of Stirrer: Adjustable; Max is 600±60r/min

 Timing Apparatus: Max is 90 minutes. Resolving power is 1s.

 Rotating Speed Measurement Error: ±2r/min

   Purpose:

    This instrument is suitable to be used in the well field or laboratory to test the sand volume of slurry. The result is determined by the changed volume of slurry after the slurry is filtrated by sieve. It is showed in percentage.

  Technical Parameters:

Sieve Specification: 200

Graduation: 0.5% for the type of "0～15%"

                        1% for the type of "15～30%"

   Purpose:

    This instrument is suitable to be used in the well field or laboratory to test the viscosity of slurry. It is calculated according to the flowing time of slurry passing through the instrument. The unit is second.

  Technical Parameters:

Hole diameter of flowing pipe is 5mm, and the length is 100mm.

The volume of one end of measuring cup is 500ml, and the other is 200ml.

   Purpose:

    This instrument is suitable to be used in the well field or laboratory to test the specific gravity of slurry. The unit is g/cm³.

  Technical Parameters:

Measurement Range: 0.96～3g/cm³<

Measurement Accuracy: 0.01g/cm³

Volume of Slurry Cup: 140cm³

   Purpose:

    This instrument is suitable to be used in the well field or laboratory to test the water loss volume of slurry. Water Loss Volume is the water volume flowing from the certain amount of slurry under the condition of certain air pressure.

  Technical Parameters:

Slurry Pressure: 0.7MPa

Filtrating Area: 45.8cm²

   Including:

       NA-1 Slurry Sandiness Content Tester

        NS-1 Slurry Water Losing Content Tester

        NB-1 Slurry Densimeter

        1006 Slurry Viscometer

   Including:

        NA-1 Slurry Sandiness Content Tester

        NS-1 Slurry Water Losing Content Tester

        1006 Slurry Viscometer