|
SYD-1884 Petroleum
Products Density Tester
Purpose:
This
instrument is
suitable to the standard of GB/T1884. Test the density of petroleum and liquid petroleum
products.
Technical Parameters:
Heating power: 700W,
1000W
Bath Volume:
¦µ300¡Á380mm
Measuring Cylinder:
500ml
Petroleum Products
Density Tester: SY-05(Group of 10)
Temperature Control
Range: -20¡æ¡«100¡æ
Temperature Control Accuracy£º¡À0.25¡æ
Temperature Sensor:
Pt100
Power source: 220V
50Hz AC
|
 |
|
SYD-265E
Asphaltum Kinematic Viscosity Tester (Capillary)
Purpose:
This
instrument is
suitable to the standard of T0619-93.Test the kinematic viscosity of sample under certain
temperature.
Technical Parameters:
Testing Temperature:
room temperature¡«135¡æ
(room temperature¡«180¡æ)
Temperature Control
Accuracy: ¡À0.1¡æ
Electrical Heating
Power: 1650W
Capillary: 4
Countercurrent
Capillary Viscometer: 7
|
 |
|
SYD-0620
Asphaltum Kinematic Viscosity Tester (Vacuum Decompression
Capillary)
Purpose:
This
instrument is designed and produced according to the standard of
T0620-2000. Asphaltum the Kinematics Viscosity Experiment (Vacuum
Decompression Capillary).
Technical Parameters:
Electrical Power:
220V¡À10% 50Hz AC
Temperature Control
Range: room temperature¡«100¡æ
Temperature Control
Accuracy: ¡À0.01¡æ
Pressure Range: 300¡À0.5mmHg
Timing Range: 999.9s
Timing Accuracy: ¡Ü0.05%
Automatically
control the temperature and vacuum degree. Function of clock. LCD screen
automatically evaluate and show the testing result.
|
 |
|
SYD-0621 Asphaltum Standard Viscometer
Purpose:
This
instrument is
suitable to the standard of T0621. Test the viscosity of liquid petroleum asphaltum, coal
asphaltum and emulsification asphaltum in the state of flowing.
Technical Parameters:
Temperature Heating
Slot: §¶160mm¡Á100mm/p>
Sample Pipe:
Inner-diameter §¶40mm
Flowing hole diameter: §¶3mm,§¶4mm,§¶5mm,§¶10mm
Receiving Bottle:
100ml
Temperature Control
Range: room temperature¡«90¡æ
Temperature Control
Accuracy: ¡À0.2¡æ
Timing Mode: Digital Displays
|
 |
|
NDJ-1C
Brookfield Rotating Viscometer
Purpose:
This
instrument is produced by the standard of T0625-2000. It is used to test the
apparent viscosity of the road bitumen, and it is also used to test
viscosity of the thermo-sol, paraffin wax, medicament and high polymer.
Technical
Parameters:
Measure
Range: 100¡«200000mPa¡¤s
Stirrer
parameter:
21#¡¢27#¡¢28#¡¢29#
Stirrer
rotating speed:
5¡¢10¡¢20¡¢50r/min
Measure mode: automatic, hand-operated
Temperature control range: room temperature¡«200¡æ
Temperature control accuracy:
¡À0.1¡æ
Volume of
inner bag: 10cc
Working
environment:
Environment temperature: 5¡«35¡æ
Environment humidity: ¡Ü80£¥
Electric source: AC 220V¡À10V
50Hz¡À1Hz
No electromagnetic, no
shake, no active gas
|
 |
|
NDJ-1D
Brookfield Rotating Viscometer
Purpose:
This
instrument is produced by the standard of T0625-2000. It is used to test the
apparent viscosity of the road bitumen, and it is also used to test
viscosity of the thermo-sol, paraffin wax, medicament and high polymer.
Technical
Parameters:
Measure Range: 100¡«2¡Á106mPa¡¤s
(optional
30# up to 4¡Á106MPa¡¤s)
Stirrer
parameter:
21#¡¢27#¡¢28#¡¢29#
(optional 30#)
Stirrer
rotating speed: 0.5¡¢1¡¢2¡¢5¡¢10¡¢20¡¢50 r/min
Measure mode: automatic, hand-operated
Temperature control range: room temperature¡«200¡æ
Temperature control accuracy:
¡À0.1¡æ
Volume of
inner bag: 10cc
Working
environment:
Environment temperature: 5¡«35¡æ
Environment humidity: ¡Ü80£¥
Electric source: AC 220V¡À10V
50Hz¡À1Hz
No electromagnetic, no
shake, no active gas
|
 |
|
NDJ-1E Rotation
Viscometer £¨Digital£©
Purpose:
The instrument is suitable to determine absolute viscosity
of Newton liquid and apparent viscosity of non-Newton
liquid. It is widely used to determine viscosity of
materials, such as latex, oils, chemical reagent,
photosensitive resin, paraffin, printing inks, rubber
solution, fruits juice, asphalt bonding adhesive, detergent
agent etc, in the field of chemical, medicine, cosmetic and
chemistry.
Main function:
1. Intelligent stepless speed regulation, ultra-bright LCD
displays in Chinese characters;
2. Matched with a micro-printer, it can plot measurement
report;
3. With RS232 interface, it can communicate with computer
directly.
¡¡
Technical specification:
1.
Measurement range: 0.1¡«6¡Á106
mPa¡¤s£»
2.
Rotor: 0#, 1#, 2#, 3#, 4# total five pieces.
3.
Rotor rotation speed: 0.1¡«200 r/min;
4.
Measurement error: ¡À 2% (F.S);
5.
Repeatability: ¡À 1% (F.S);
6.
Power supply: AC 220 V ¡À 10 % 50 Hz;
7.
Working environment:
Ambient temperature: 5¡«35¡æ;
Relative humidity: ¡Ü80%.
|
¡¡ |
|
NDJ-1F
Rotation
Viscometer
Purpose:
The instrument is designed and
made as per stated requirement of T0625-2000 in the Industry
Standard of People Republic of China JTJ052-2000 Test
Regulations of Highway Engineering Bitumen and Bitumen
mixtures. It is suitable to determine the
apparent viscosity of highway bitumen by rotating method of
Brookfield viscometer at a temperature over 45¡æ. It can be
used to determine the construction temperature of bitumen
mixtures according to viscosity against temperature curve.
What¡¯s more, the instrument can also be used to measure the
viscosity of hot sol, oils, paraffin, high polymer etc, and
it is widely used in the field of cosmetic, food, medicine,
dope and chemical etc.
Referrence standard:
ASTMD4402
Main function:
1. Intelligent stepless speed regulation, ultra-bright LCD
displays in Chinese Characters;
2. Using temperature controller of intelligent type to set,
control and display the bath temperature.
3. Matched with micro-printer, it can plot measurement
report.
4. Using serial port cable, it can communicate with computer
directly;
5. Using little sample operating mode, the maximum cubage of
sample is approximately 20 ml.
Technical specification:
1. Measurement range: 25mPa¡¤s ¡« 1¡Á107mPa¡¤s
(If choose to equip the 30©| measurement rotor, it can
extended to 2¡Á107mPa¡¤s
);
2. Rotor: 21©|£¬27©|£¬28©|£¬29©|total four piece.( 30©| measurement
rotor is optional );
3. Rotor rotation speed: 0.1¡«200 r/min;
4. Measurement error: ¡À2% (F.S);
5. Controlling temperature range of heater: room
temperature¡«200 ¡æ£»
6. Controlling temperature accuracy of the heater: ¡À0.1 ¡æ£»
7. Sample container cubage: 20ml;
8. Power supply: AC 220 V¡À10 % , 50 Hz;
9. Working environment:
Ambient temperature: 5¡«35 ¡æ (attention: environment
temperature should be 5 ¡æ lower than the controlling
temperature of heater.);
10. Relative humidity: ¡Ü80 %. |
¡¡ |
|
WNE-1A Asphaltum Engler Viscometer
Purpose:
This
instrument is
suitable to the standards of GB/T266 and T0622. Test the engler viscosity of
emulsification asphaltum and coal asphaltum.
Technical Parameters:
Water Value: 51¡À1s
Temperature Range:
room temperature¡«100¡æ(Digital displays of denoting)
Temperature Control
Accuracy: ¡À0.2¡æ
|
 |
|
WNE-1B Asphaltum Engler Viscometer (Petroleum Productions Engler
Viscometer)
Purpose:
This
instrument is
suitable to the standards of GB/T266 and T0622. Test the viscosity of emulsible asphaltum and coal asphaltum. In the prescriptive temperature
condition, respectively test the time of 50ml asphaltum flows from
prescriptive dimension of holes of two vessels, and show the average value
of two results.
Technical Parameters:
Acceptor: 200cc
Water Value: 51¡À1s
Temperature Control Range:
Room temperature¡«100¡æ
Temperature Control
Accuracy: ¡À0.2¡æ
Digital displays
timer (built-in, maximum:9999s)
|
 |
|
SYD-0623 Saybolt
Viscometer
Purpose:
The
instrument is used to determine the viscometer of the sticky bitumen,
emulsification and liquid bitumen in the high temperature. It is conform to
the standard of T0623-1993 in the "Highway Asphalt and Mixture of Asphalt
Testing Rules JTJ 052-2000".
Technical Parameters:
Temperature control
range of the constant temperature bath:
room temperature to 240¡æ
Temperature control
accuracy of the constant temperature bath:
¡À0.1¡æ
Timing range and
accuracy: 999.9s¡À0.1s
Volume and
inaccuracy of receiving flasks: 60ml¡À0.05ml
Insulation
resistance: 20M¦¸
Insulation strength:
AC 1500V 50Hz, There is no glitter and no breakdown in one minute in the
endure pressure test.
|
 |
|
SYD-0624 Tenacity of Asphaltum Tester
Purpose:
The
instrument is used to determine the asphalt toughness in special conditions,
and suitable to the T0624-1993 rules in the JTJ2000 standards. It is made of
PC (option: match with jet printer), PC data access, toughness tester, drag
tester est. necessary spare part. Main device accept PC and underside
through serial communication to determine the force and shape change and
auto calculate the toughness and tenacity. The instrument has the
characteristics of drag force homogeneous, shape light and handy, and
operation convenient, and the upside determine software windows beautiful,
and information storage and deal with convenient, speedy, and match with the
jet printer, the user can directly print the report and the determine
information.
Technical Parameters:
drag speed:
500mm/min
the biggest force:
1000N
the dragging force
un-linear error: £¼0.5£¥
the dragging force
sampling interval: 0.5mm>
distance determine
range: 610mm£¨the standard requirement£©
shape change
determine error: ¡À0.5mm
supply electrical
source: 220V¡À10£¥ 50Hz AC 250W
shape dimension:
530¡Á400¡Á1220mm
|
 |
|
PAV-1 Bitumen Tension Ageing System
Purpose:
This
instrument is produced by the standard ASTM PS36, AASHTO PPI. It is used to
test the ageing of the asphalt in the nature environment.
Technical Parameters:
Power
supply£º220V 50Hz
Power£º4kW (ageing box:2.5kW, autovac:1.5kW)
Auto control item and accuracy:
Pressure control£º ageing box:2.1¡À0.1MPa,
autovac:15¡À2.5MPa
Temperature control£º ageing box:90-100¡À0.5¡æ,
autovac:170¡À5¡æ
Time control£º ageing box:20h¡À10min, autovac:30¡À1min
Process control£º polling and judge the initial time and temperature, process
temperature, final pressure
Instrument measurement£º
Ageing box£º600¡Á450¡Á450mm
Autovac£º380¡Á380¡Á420mm
|
 |
|
SYD-XY150 Rotatory Compactor
Purpose:
The
instrument refers to criterion: AASHTO TP3, SHRPM-002.
The
instrument is used to simulate the bitumen mixture road surface moulding.
Receive pre-heated bitumen mixture, manual load and unload, calibrate all
compacting operation parameters one time, and it can auto run and record
compacting proceed data. And the instrument is matched with auxiliary
setting for removing mould.
Technical Parameters:
Controlling
parts: single chip machine;
Loading
method: hydraulic pressure or pneumatic;
Compacting
pressure: 200-1000kPa;
Rotation
angle: 0-2¡ã, adjustable precision: ¡À0.02¡ã;
Rotation
speed: 30¡À0.5rpm;
Rotation
times: 1-999times, adjustable;
Moulding
container specification: 100mm & 150mm;
Data
collection: auto, printer output results.
|
 |
|
SYD-0633
Flash Point Tester for Petroleum Asphaltum
Purpose:
This
instrument is
suitable to the standard of T0633-93. Test the flash point of the liquid asphaltum whose
flash point is lower than 93¡æ.
Technical Parameters:
1. Thickness of the open cup: 2.4¡À0.4mm
2. Temperature raising speed: 1 ¡«10¡æ/min
3. Total quantity of
the cup: ¡Ü95g
4. Graduation of the
thermometer: 1¡æ
5. Diameter of the
above cup: 64mm
6. Electrical Power:
AC 220V ¡À 10%; 50Hz
7. Diameter of the down cup: 38mm
8. Depth: 47mm
9. Inner diameter: 0.7¡«0.8mm.
|
¡¡ |
|
SYD-255A
Petroleum Distillation Tester (test asphaltum)
Purpose:
This
instrument is
produced according to the standard of T0632-93. Test the content of the distillate of the asphaltum in the required temperature.
Main Technical
Parameters and Structure:
Electric Stove Heating Power: 1000W
Power source: 220V
50Hz AC
Adjusting temperature continuously with controllable
silicon.
|
 |
|
SYD-0613
Petroleum Bituments Breaking Point Tester
Purpose:
This
instrument is
suitable to the standard of 0613-1993. Breaking Point of Petroleum Bitumen
Testing Method. Test the breaking points of all kinds of bitumen under the
condition of low temperature.
Technical Parameters:
1. temperature
testing range: -30 ¡«100¡æ
2. Temperature
accuracy: 1¡æ
3. Dimension of
steel piece: 41¡Á20¡Á0.15mm
4. Max. distance of
clamp: 44mm
5. Step gap: 3.5mm
|
 |
|
SYD-0613A
Automatic Petroleum Bituments Breaking Point Tester
Purpose:
This
instrument is
suitable to the standard of GB/T4510 and T0613-1993. Test the temperature of
bitumen when bitumen appear crack under the condition of cooling and
bending. Operate three same experiments under the same environment.
Automatically check and calculate the average value of three results.
Temperature descending speed is controlled by computer. Inner printer prints
the results of the experiment.
Technical Parameters:
1. temperature
testing range: -30 ¡«25¡æ
2. Temperature
accuracy: 1¡æ/min
3. Dimension of
steel piece: 41¡Á20¡Á0.15mm
4. Sample number: 3
¡¡ |
 |
Previous £ü
Next £ü
Return |
