Purpose:

    This portable inclinometer is a small instrument to measure the drilling curve. It is suitable for measuring the azimuth and point angle with continuous multipoint in non-magnetic drill whose diameter is bigger than 46mm.We can read the incline on the ground by the instrument's manger needle orientation structure and the method of non-electronic measurement though three-core cable. This instrument is simple in convenient in use, and the precision is as same as other big mouth diameter instruments.

Main Technical Index:

  1. Measurement range of point angle: 0°～50° , every graduation: 30′

  2. Measurement range of the azimuth: 4°～356°, every graduation: 4°

  3. Power supply: DC 12V/100mA

  4. Sealing performance: enduring liquid pressure is not lower than 15Mpa

  5. Outside diameter length and weight of the instrument: 

    operating box on ground: 300×210×85mm  weight: 1.5kg

    instrument under pit: 40×1260mm  weight: 1.5kg

    length of pipe: 40×570mm   weight : 2kg

  6. The instrument in the pit highest temperature for working: 50°

Purpose:

    This instrument is specially used to measure the point angle and azimuth of the drilling. The data on inclination is the most necessary documents for the drilling's acceptance. In order to control the drilling's orientation, grade of inclination, and prevent drillings accidents, we must know the inclination of drillings without delay, so appropriate measures will be taken. It is more necessary to control the direction and inclination required in the orientation drilling. This instrument is suitable for the drillings in non-magnetic rock and ore bed, and the drilling diameter is larger than 46mm. Without cable and single point is measured.

Main Technical Index:

  1. Measurement range of the azimuth: 0～360°, graduation division value: 4°

     measuring error: ±4°

  2. Measurement range of point angle: 0～50°, graduation division value: 2°

     measuring error: ±1°(when range is 0～30°); ±2°(when range is 30°～50°)

  3. Running time of the timer: max: 120min       min: 20min
  4. Outside diameter of the instrument: 40×1230mm    Weight : 6kg

     main body of the instrument (with the protecting barrel)37×200mm

  5. The highest temperature for work: 80°

  6. The enduring liquid pressure of sealing performance of the instrument's shell: 10MPa

  7. There are two principal parts in every instrument.

Purpose:

    KXP-2D small caliber digital compass inclinometer is designed for in non magnetic zone to determine and control the inclination of project drilling hole, detection drilling hole, directional drilling hole. The instrument integrates sensor, power supply, data access, single/ multi-points method to determine the dip angle, azimuth angle separately, no trouble of mechanical clock.

    It is widely used in project, hydrological project, oil field, coal field, geological project etc.

Main Technical Index:

  1. Depth for determination inclination: ≤1500 m

  2. Dip angle measuring range: 0-50°

                     measuring precision: ± 0.2°

  3. Azimuth angle measurement range: 0-360°

      dip angle is 1-3°, measurement precision: ±4.0°

      dip angle is 3-50°, measurement precision: ±2.0°

  4. Dimension of determination inclination probe:  Ф40 mm

Purpose:

    This instrument is a new style economic digit inclination detecting instrument, and it is used to detect the dip angle and azimuth of the vertical or directional well (hole), moreover it is used to detect the directional hole for controlling the dip angle and directional angle. It is widely used in the zone of project, hydrology, oil field, coal field, geology and so on.

     The instrument composes of controlling unit on ground, inclination probe, and it is portable; adapting the data encode long wire communication technical, the cable sends data is reliable; high performance sensor combines with the digit signal processing technical, the detection result is with high precision, and with good stability; High light LCD figure display method is clear and visual; the printer on site prints the inclination. The instrument operation is comfortable, and suitable to be used in field.

Main Technical Index:

1.  Depth for measurement incliner: ≤1200m

4.  Method for measurement: fixed point measurement, the interval and quantity of measurement points is pre-set random.

5. Power supply: AC220V/50Hz

6. The working surrounding for the ground controlling unit:

      Temperature: -10°C～50°C; relative humidity: ≤85%

7. The working surroundings for measurement incliner probe:

      Temperature: 0°C～75°C; withstanding pressure: ≤15MPa

8.  The ground controlling unit

      Dimension for shape: 270×220×155(mm)

      Weight：          8(㎏)

9. Measurement incliner probe

      Dimension for shape: Φ40×1600(mm)

      Weight:            7(kg)

   Purpose:

    The instrument is specially designed for measuring the slant angle and the azimuth angle of a borehole which should be uncased and free from any magnetic disturbance. These two parameters to be measured are the requisite information to control the direction of drilling in order to avoid any accident in the course of drilling. In case of directional drilling, to control the drilling direction and the inclination of the borehole is particularly important. Azimuth angle of a borehole is the angle between the magnetic north and the projection line of the borehole on the horizontal plane. The reading should be counted from the magnetic north in the clockwise direction to the line of projection of the borehole.

    Slant angle is the angle between the borehole and the plumb line.

Technical Specifications:

 1. power supply: 90V DC

 2. Measuring range of slant angle: 0°～50°

        Each division represents 30’

        Measuring error: not greater than ±30’

 3. Azimuth angle can be measured at slant angle of 2°

        Each division represents 5°

        Measuring error not greater than ±4°

 4. Max. fluid pressure the down hole probe can withstand in the borehole: 500kg/cm2

 5. Max. allowable working temperature for the down hole probe: 100℃

        Working temperature for the surface console: -20°～+50°

 6. Diameter of the down hole probe: not greater than 65mm

        Length (not including extension tube): 145mm

        Weight: 20kg

 7. Point measurement method is adopted.

    Slant angle and azimuth angle can be directly read out on the surface console.   Multi-point measurements can be taken for every time of well logging.

  Purpose:

    The result of inclination measurement is the necessary document for drilling's acceptance check. In the course of the drilling, in order to control the direction and protect form accidents, it is required to judge the inclination degree, so that we can take actions. The requirement is higher for measuring inclination in orientation of drilling. The JJX-3B well inclinometer is a special facility for measuring drilling degree of inclination, its result is shown by point angle and azimuth angle. The drilling's direction is the included angle between the projection of water level and the magnetic north. The magnetic north is shown as 0℃ and it is calculated from the magnetic north the clockwise direction to the line of the projection. The point angle of the drilling is the included angle between the drilling and the plume line.

    It is only suitable for use without magnetic interference and un-down bore casing in the drilling.

    JJX-3B well inclinometer is more applied to precise measurement for vertical hole or small point angle hole.

Main Technical Index:

 1. Power supply: DC 12V/100mA (excluding the loss of the cable)

 2. Measurement range of point angle: 0℃～15℃, every graduation: 6′

       Error for measurement: ±6′

 3. Measurement range of azimuth angle: 0℃～360℃ every graduation: 5℃

       Error for measurement: ±3℃ (as point angle is ≥2℃)

 4. The instrument in well enduring most hydraulic pressure: 50MPa

 5. The instrument in well enduring highest temperature for work: 100℃

     The controlling case on the ground of temperature for work: -20℃～+50℃

 6. Appearance of the instrument in well: Φ54×145mm Weight: 10kg

 7. Point measuring is used. We can directly read the point and azimuth angle on the controlling case on the ground. Multi points can be measured when workers go down the pit each time.

    Purpose:

    This instrument uses high-precision sensor and has a system of data dealing. It is mainly used to test the uprightness of bored concrete pile. It is also widely used in inspecting move in the digging of slope, dyke, coast and other occasions using inclinometers.

   It consists of three parts: 1. receiving instrument 2. detecting pipe in well      

Technical Specifications:

 1. Measuring range: 0°～30°

 2. Measuring error: 0°～10°: 10′

                                       10°～30°: 20′ (when the measuring range is ＜5°, measuring error is ＜6′)

 3. Power: AC 220V±10%, 50Hz

 4. Length of cable: 100M

    Dimension of detecting pipe in well: Φ50×1500mm

 5. Weight of detecting pipe in well: 16.5Kg

 6. Dimension of ground instrument: 280×230×110mm

 7. Airproof capability: ≤ 20Mpa;

 8. Working conditions: Instruments on ground: 0℃ ～-45℃

    Detecting pipe in well: -10℃ ～50℃

Purpose:

    This instrument is a fashionable portable high-precision digital inclinometer .It is designed to enable measurement of the tool face (roll) ,pitch and azimuth orientation angles in borehole logging and drilling applications .It is applied to precise measurement for vertical or directional well hole ,directional or unidirectional drilling hole. It is widely used in some inclinometer fields such as engineering, hydrology ,oil well ,coal land and geology .The system consists of down hole probe and underground control unit.

Technical Specifications:

1.  Depth for measurement incliner: ≤1200m

2.  Range and precision for the measurement parameters

        Dip angle measuring range: 0～50°

        Dip angle: 0～20°; measuring precision: ±0.1°

        Dip angle: 20～50°; measuring precision: ±0.2°/p>

     Azimuth measuring range: 0～360°

        Dip angle measuring range: 1～3°; measuring precision: ±3°

        Dip angle measuring range: 3～50°; measuring precision: ±1.5°

    Tool-face angle measuring range: 0～360°(parameter selectable);

       measuring precision: ±1.5°

3.  Method for measurement: fixed point measurement, the interval and quantity of measurement points is pre-set random.

4. Power supply: AC220V/50Hz

5. The working surrounding for the ground controlling unit:

      Temperature: -10°C～50°C; relative humidity: ≤85%

6. The working surroundings for measurement incliner probe:

      Temperature: 0°C～75°C; withstanding pressure: ≤15MPa

Purpose:                         

  This instrument is a fashionable portable high-precision digital inclinometer .It is designed to enable measurement of the tool face (roll) ,pitch and azimuth orientation angles in borehole logging and drilling applications .It is applied to precise measurement for vertical or directional well hole ,directional or unidirectional drilling hole. It is widely used in some inclinometer fields such as engineering, hydrology ,oil well ,coal land and geology .The system consists of down hole probe and underground control unit.

Technical Specifications:

1.  Depth for measurement incliner: ≤1200m

2.  Range and precision for the measurement parameters

        Dip angle measuring range: 0～50°

        Dip angle: 0～20°; measuring precision: ±0.1°

        Dip angle: 20～50°; measuring precision: ±0.2°

     Azimuth measuring range: 0～360°

        Dip angle measuring range: 1～3°; measuring precision: ±3°

        Dip angle measuring range: 3～50°; measuring precision: ±1.5°

        Tool-face angle measuring range: 0～360°(parameter selectable);

        measuring precision: ±1.5°

3.  Method for measurement: fixed point measurement, the interval and quantity of measurement points is pre-set random.

4. Power supply: AC220V/50Hz

5. The working surrounding for the ground controlling unit:

      Temperature: -10°C～50°C; relative humidity: ≤85%

6. The working surroundings for measurement incliner probe:

      Temperature: 0°C～75°C; withstanding pressure: ≤15MPa

7. Measurement method：pointing measurement, measured point depth interval and quantity may be set random.

Purpose:                         

    KXZ-2 Level Inclinometer is special new style setting for measurement level hole inclination angle and direction. It is widely used in some inclinometer fields such as mining, water conservancy, railroad and build for geological explore, construct and determination. For adopted new high precision senor and computer technique, its capability is much better than general measurement inclination instrument. And it is only suitable to determinate the level hole in non-magnetic terrane.

    The instrument is composed of the notebook PC (provide for oneself), ground controlling unit, probe to measure incliner, and it is designed to be portable; adopted the data encoder long distance transformation technology, transformation data though cable is nicety and credibility; integrated high capability sensor and data signal proceed technology, the result of measurement is high precision and good stability; direct send data to notebook PC through RS—232 serial port, the PC software displays clear, intuitionistic measurement data and projection chart for plane, section and side, and store measurement data; to connect the PC with multi-color printer to print measurement incliner data, plane, section, side projection chart and spatial track chart in paper A4, and store the dimensional track chart; and to measure the drilling depth at the same of measure incliner. And the instrument is simple for operation, suitable to used in field.

Technical Specifications:

1. Obliquity measurement range and error:  -60～60°, error is ±0.1°

2. Azimuth measurement range: 0～360°, error is ±1.5°

3. The outside diameter for the measurement inclination prode: 40mm

4. The depth of the drilling: ≤1200m

5.  The work environment for the measurement inclination probe：temperature: 0°C～75°C   withstand pressure: ≤15Mpa

6.  Power supply: AC220V±10%  50Hz

7. Measurement method:pointing measurement, measured point depth interval and quantity may be set random.

8. Using modern communication encode long distance transfer technique, realize long distance cable digit signal credible transfer, and improve the anti-jamming capability of the instrument.

9. Record date, time and print the measurement result on time.

10. The notebook PC capability is large, may store many quantity measurement data and information, satisfy all kinds of the storage information. Connected with the color jet printer may print A4 measurement inclination data, plane, section, side projection chart and spatial track chart.

Purpose:                         

    KXZ-3 Digit Inclinometer (complete interspaces) is a new style high precision digit well inclination measurement instrument, is used to directional and measurement inclination in non-magnetic zone for engineering hole, directional hole, level hole, rock core hole and the right connecting hole. May provide the drilling depth, tool face angle, dip angle and azimuth and so on parameters, widely used in engineering, hydrology, oil field, coal field, geology and so on measurement well realm.

    The instrument is composed of the notebook PC (provide for oneself), ground controlling unit, probe to measure incliner, and it is designed to be portable; adopted the data encoder long distance transformation technology, transformation data though cable is nicety and credibility; integrated high capability sensor and data signal proceed technology, the result of measurement is high precision and good stability; direct send data to notebook PC through RS—232 serial port, the PC software displays clear, intuitionistic measurement data and projection chart for plane, section and side, and store measurement data; to connect the PC with multi-color printer to print measurement incliner data, plane, section, side projection chart and spatial track chart in paper A4, and store the dimensional track chart; and to measure the drilling depth at the same of measure incliner. And the instrument is simple for operation, suitable to used in field.

Technical Specifications:

1. Obliquity measurement range and error:  -60～60° , error is ±0.1°

2. Azimuth measurement range: 0～360°, error is ±1.5°

3. the outside diameter for the measurement inclination prode: 40mm

4. The depth of the drilling: ≤1200m

5. The work environment for the measurement inclination probe:  temperature: 0°C～75°C, withstand pressure: ≤15Mpa

6. Power supply: AC220V±10%  50Hz

7. Measurement method: pointing measurement, measured point depth interval and quantity may be set random.

8. Using modern communication encode long distance transfer technique, realize long distance cable digit signal credible transfer, and improve the anti-jamming capability of the instrument.

9. Record date, time and print the measurement result on time.

10. The notebook PC capability is large, may store many quantity measurement data and information, satisfy all kinds of the storage information. Connected with the color jet printer may print A4 measurement inclination data, plane, section, side projection chart and spatial track chart.

Purpose:                         

    KXO-1 Engineering Inclinometer is the instrument for precision measurement displacement by obliquity, mainly used to monitor deep footing groove, side slope, groundsill, pier and so on foundation displacement during observed. Through the method of drilling, embedding the measurement inclination groove pipe under the ground, the measurement inclination groove pipe distort with the footing groove, side slope and groundsill, the pulley on measurement inclination probe measure one by one point along the groove from up to down, to report the level displacement. According to the displacement to predict, and direct the construct; during measurement pier, fix the probe in pier may gain the pier inclination change value.

    The instrument report data is credible, and operation is simple, suitable to all kinds of outside environment, and it is the special instrument for determination the footing groove, side slope and groundsill displacement.

Technical Specifications:

 1. probe size： length 800mm，diameter 30mm

 2. acceleration sensor installation orthogonality error：≤0.5°

 3. idler pulley interval：500 mm

 4. measurement angle precision：0.5mm/1m，distinguish rate 5″

 5. angle measurement range：0～±30°

 6. measurement depth：≤ 50m

 7. power supply voltage：place a chargeable lithium cell group in digit recorder, in series, +15.6V(1A)，+7.2V(1B)

 8. work temperature：-10～+50℃

 9. storage capability：60 holes

Purpose:

    It is especially to measure the drilling's point and azimuth angle during drilling. The depth on measuring inclination is the necessary document for the drilling's acceptance check. In order to control the drilling's orientation, grade of inclination, and prevent drilling accidents. We must know the multination without delay, so appropriate measures will be taken. It is more necessary to control the direction inclination required in the orientation drilling.

   It is only suitable for the use in the nonmagnetic rock stratum and ore bed.

   It's more than φ80mm.

   No cable is used and only single point is measured.

Main Technical Index:

 1. Measurement range of the azimuth: 0～360°,every graduation: 4°

    Measuring error: ±4°(as point angle is ≥  4°)

 2. Measurement range of point angle: 0～60°, every graduation: 4°

    Measuring error: ±1°(as 0～30°), ±2°(as 30°～60°)

 3. Timer max running:120min,min running:10min

 4. Appearance and weight of the instrument in well:Φ75×1990mm,33kg

 5. Highest temperature for work:80℃

 6. Enduring hydraulic pressure for sealing of 7MPa

 7. There are two principal parts in every instrument

   Purpose:

    This instrument is used for measuring the slant angle and azimuth angle of the magnetic borehole of a diameter greater than 56mm.

Technical Specifications:

 1. Measuring ranges: slant angle:   0°～50°

                                           azimuth angle: 0°～360°

 2. Measuring Accuracy: error of slant angle: ±30’

                        when slant angle ≥ 3°, error of azimuth angle is ±6°

 3. Average excursion angle in each hour: ≤12°

 4. Max. depth: 1000M

 5. Power supply: AC 50Hz 220V±10%, 75W

 6. Working Temperature: -10℃～45℃